Pump series FP2+
3A certified hygienic process pump
| Max. flow | 110 m³/h |
| Max. head | 110 m |
| Max. product viscosity | 1.000 cP |
| max. motor power | 45 kW |
Pump series FP2+
These 3A certified pumps have stainless steel 316L pump casings constructed in thick cold rolled plate, 100% non-porous and extremely smooth. The pumps have open investment cast impellers, constructed in 316L or duplex materials.
Thanks to its crevice-free design and electropolishing as a final surface treatment, the FP2+ pump series are perfectly cleanable, resulting in a reliable component for your production process.
- Electropolished, easy to clean construction, no bacteria traps and no small clearances in order to clean the area around the O-ring
- Pressed stainless steel in 2B quality plate, extremely smooth
- Large seal cavity to clean mechanical seal properly
- Monobloc execution with std. IEC motors
Application areas
The Packo 3A certified process pumps of the FP2+ series are used in the most demanding hygienic applications in almost all industries such as dairies, breweries, beverage industry, distilleries, etc.
They are the ideal solution for filtration applications, pasteurisation, evaporating systems, yeast propagation and for CIP cleaning systems as well.
In pharmaceutical and biotech industry they are mainly used for handling Purified Water and as CIP forward pump in cleaning systems.
Your benefits
- High pump efficiency resulting in lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: perfectly cleanable
- Easy construction and easy maintenance: less downtime
- Standard components
- Easy to install
- 2 mechanical seal diameters for entire range
- Robust construction
Technical information
| Performance | |
| max. flow rate | 110 m³/h |
| max. differential head | 110 m |
| max. inlet pressure | 13 bar |
| max. liquid viscosity | 1000 cP |
| max. temperature | 140°C |
| impeller type | open |
| max. free passage | 22 mm |
| max. motor power | 45 kW |
| max. speed | 3000/3600 rpm |
| available frequency | 50/60 Hz |
| Specifications | |
| materials wetted parts | stainless steel 316L or similar |
| mechanical seal configuration | single sterile, quench, double |
| available O-ring material | EPDM, FKM, FEP-FKM, FFKM, Silicone |
| connections | 3A approved sanitary fittings only |
| surface finish | food quality, internal welds hand polished electropolished (wetted parts 0.8 μm) |
| certificates & legislation |  |
Assembly and disassembly videos
For all different configurations of the FP2+ series you can find an assembly/disassembly video here. These videos show easy to follow steps to assemble the pumps and replace the seals.