Max. flow | 15 m³/h |
Max. product viscosity | 100.000 cP |
max. motor power | 45 kW |
The CM is a hygienic colloid mill with toothed rotor and stator in electropolished duplex stainless steel. They are used to grind particles in suspension precisely and with reproducible results in an annular gap between the stator and rotor which can be adjusted by changing the axial position of the rotor. The rotor and stator contain 2 milling zones and thanks to the high shear forces between rotor and stator the CM will also mix the fluid.
The Packo CM colloid mill is used for a wide range of purposes in the production line in the general food, fruit & vegetable and cosmetic industry. The principal applications are wet size reduction of solids in suspension, pulping and mashing of bulky solids and generation of high viscous suspensions and emulsions.
Performances | |
Max flow rate | 15 m³/h |
Max differential head | 35 m with water |
Max inlet pressure | 10 bar |
Max. fluid viscosity | 100.000 cP with feed pump |
Max temperature | 140°C |
Max motor power | 45 kW |
Max speed | 3600 rpm |
Available frequency | 50/60 Hz |
Specifications | |
Materials wetted parts | stainless steel 316L and duplex |
Mechanical seal configuration | single, bellow, sterile, quench, double |
Available material O-ring | EPDM, FKM, FEP-FKM, FFKM |
Connections | hygienic fittings |
Surface finish | hygienic quality, electropolished |
Certificates & legislation | ![]() |